Immediately available
€22.21
Prices incl. VAT plus shipping costs net €18.66
Product information "TCI LED-Driver DCC 12W 700mA/U S"
12W constant current LED driver
The ECG DCC 12W 700mA/U S for LED luminaires from TCI is equipped with IP20 protection and suitable for indoor use. It can be used for luminaire installation as well as independent mounting. Additionally, its class II protection prevents electric shocks for direct or indirect contact. The rated power is 12 W.
Terminal cover and cable retainer included
The constant current LED driver is supplied with a terminal cover and a cable retainer. The input and output terminal blocks are on opposite sides (wire cross-section up to 2.5 mm2 / AWG13). There is a single terminal block on primary and secondary circuit. Clamping screws for cables with a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondary circuits. The driver can be attached with screws.
The DCC 12W 700mA/U S is protected against overheating and short circuits, against mains voltage spikes and against overload. It has a service life of 50,000 hours.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| output voltage: | 2-16 V |
| operating mode: | constant current |
| conformity: | CE, ENEC |
| lifetime: | 50000 h |
| system power: | 12 W |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | linear |
| max housing temperature (tc-max): | 75 °C |
| protection type: | IP20 |
| mounting: | surface mounting |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703300354 |
|---|---|
| Length | 34 mm |
| Width | 115 mm |
| Height | 19 mm |