TCI LED-Driver DC MAXI JOLLY HC BI - 123415
Shipping in 42 day(s)
€60.43
net €50.78
Product information "TCI LED-Driver DC MAXI JOLLY HC BI - 123415"
55W LED driver for luminaire installation
The emergency-current capable dimmable constant current LED driver DC MAXI JOLLY HC BI is suitable for installation in luminaires of protection class I. It has a nominal output of up to 55 watts and is equipped with IP20 protection.
The LED ECG has an Active Power Factor Corrector. It also has an analog input (NTC) and a 12V auxiliary output for max. 100mA. The current regulation including temperature fluctuations is + - 5%.
Dimmable via 0/1-10V or PushDim
The LED driver is dimmed either via 0/1-10V interface or via PushDim. The input and output terminal blocks are on the same side (wire cross-section up to 1.5-2.5mm2 / AWG15-AWG13).
The TCI LED ECG DC MAXI JOLLY HC BI is protected against overheating and short circuits, mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a.
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
| system power: | 45 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 85 °C |
| protection type: | IP20 |
| mounting: | Installation |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | PushDIM |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703318311 |
|---|---|
| Length | 76 mm |
| Width | 110 mm |
| Height | 30 mm |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/