TCI LED-Driver PRO FLAT DALI BI - 127577
Immediately available
€47.16
net €39.63
Product information "TCI LED-Driver PRO FLAT DALI BI - 127577"
11W constant current LED ECG for installation
The dimmable DALI / PushDim constant current LED driver PRO FLAT DALI BI from TCI is suitable for installation in luminaires of protection class I and II. It has a nominal power of up to 11 watts.
The input and output terminal blocks are located on opposite sides (conductor cross section 1.5mm2 / AWG15). The LED ECG is fastened with screws.
Dimmable via DALI or PushDim
The LED ECG is dimmed by DALI or PushDim in a range of 0-100%.
The output current can be adjusted via DIP switches. In addition, the LED driver has an Active Power Corrector. The current regulation including temperature fluctuations is +- 5%.
The TCI LED ECG PRO FLAT DALI BI is protected against overheating and short circuits, mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a.
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| system power: | 11 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 80 °C |
| mounting: | Installation |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | switchDIM |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703343627 |
|---|---|
| Length | 42 mm |
| Width | 97 mm |
| Height | 22 mm |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/