Product information "TCI LED-Driver PROFESSIONALE DALI - 127490"
The emergency current capable dimmable DALI constant current LED driver PROFESSIONALE DALI from TCI is IP20-protected and suitable for independent mounting or luminaire installation indoors. Its Class II protection prevents electric shocks for direct or indirect contact. The maximum system power is 38 watts.
The LED ECG has DIP switches for selecting the output current and an Active Power Factor Corrector.
Dimming is possible via DALI, PushDIM and switchDIM in a dimming range of 0-100%.
The input and output terminal blocks are located on opposite sides (wire cross-section up to 1.5 mm2 / AWG15). Clamping screws for cables with a diameter of min. 2 mm – max. 9 mm are mounted on primary and secondary circuits. The driver can be attached with screws.
The TCI constant current LED driver PROFESSIONALE DALI is protected against overheating and short circuits, against mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a. The control accuracy of the output current including temperature fluctuations is + - 5%.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| system power: | 38 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 85 °C |
| protection type: | IP20 |
| mounting: | surface mounting |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | PushDIM |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703323476 |
|---|---|
| Length | 44 mm |
| Width | 146 mm |
| Height | 30 mm |
| Weight | 150 g |