TCI LED-Driver DC MAXI JOLLY SV DALI BI - 125505A
Product information "TCI LED-Driver DC MAXI JOLLY SV DALI BI - 125505A"
The emergency current capable constant current constant voltage driver for LED modules DC MAXI JOLLY SV DALI BI from TCI is suitable for installation in luminaires of protection class I and II. The output current can be adjusted via DIP switches. The maximum system power is 50 watts.
The LED ECG has a 12 V auxiliary output for a maximum of 100 mA and an analogical input for thermal sensor connection. An Active Power Factor Corrector is integrated as well.
Dimming is possible via DALI, 1-10V or phase cut (phase control dimming and reverse phase control dimming).
The input and output terminal blocks are mounted on the same side (wire cross-section up to 2.5 mm2 / AWG13).
The TCI DC MAXI JOLLY SV DALI BI is protected against overheating and short circuits, mains voltage spikes and overload. It also has a thermal protection according to EN 61347 C.5.a. The current control is + - 5% including temperature fluctuations.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 90 °C |
| protection type: | IP20 |
| mounting: | Installation |
| environment temperature from: | -25 °C |
| environment temperature to: | 55 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | DALI |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703342811 |
|---|---|
| Length | 79 mm |
| Width | 124 mm |
| Height | 22 mm |
| Weight | 190 g |