TCI LED-Driver DC MAXI JOLLY HC DALI BI - 123417
Product information "TCI LED-Driver DC MAXI JOLLY HC DALI BI - 123417"
Constant current/constant voltage LED ECG
The emergency-current capable, dimmable electronic ballast DC MAXI JOLLY HC DALI BI from TCI is equipped with IP20 protection and is suitable for the indoor installation of LED lamps of protection class I. Its rated power is up to 60 watts.
The constant current constant voltage LED driver has DIP switches for adjusting the output current. An active power factor corrector as well as an analogical input for thermal sensor connection and a 12V auxiliary output for max. 100mA are also integrated.
Dimmable via DALI, 0-10 V or PushDIM
Dimming is possible via DALI, 0-10 V or PushDIM interface. The input and output terminal blocks are (wire cross-section up to 1.5-2.5 mm2 / AWG15-AWG13).
The TCI DC MAXI JOLLY HC DALI BI is protected against overheating and short circuits, mains voltage spikes and overload. It also has a automatic resetting thermal protection acc. to EN 61347 C.5. a. The current control is + - 5% including temperature fluctuations.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| protection type: | IP20 |
| mounting: | Installation |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | DALI |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703319646 |
|---|---|
| Length | 76 mm |
| Width | 100 mm |
| Height | 30 mm |
| Weight | 230 g |