TCI LED-Driver DC LED 10V EFUR - 122319
Product information "TCI LED-Driver DC LED 10V EFUR - 122319"
The emergency current capable electronic 1-10V ballast DC LED 10V EFUR for LED modules from TCI is equipped with IP20 protection and suitable for indoor use. It can be used for luminaire installation as well as independent mounting. Additionally, its class II protection prevents electric shocks for direct or indirect contact. The rated power is 20 W.
The constant current LED driver is supplied with a terminal cover and a cable retainer. The input and output terminal blocks are opposite sides (wire cross-section up to 2.5 mm2 / AWG13). There is a single terminal block on primary and secondary circuit. Clamping screws for cables with a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondary circuits. The driver can be attached with screws.
The LED ECG has double output impedance. It also has a specific dimming terminal connection with an electronic 1-10 VDC potentiometer. It can be dimmed by the potentiometer only if used individually.
The TCI DC LED 10V EFUR is protected against overheating and short circuits, against mains voltage spikes and against overload.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| output voltage: | 10 |
| terminal type: | Push-in CAGE CLAMP® |
| conformity: | CE, ENEC |
| system power: | 20 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 80 °C |
| protection type: | IP20 |
| mounting: | Installation |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 50 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | 1-10 V |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703306332 |
|---|---|
| Length | 55 mm |
| Width | 146 mm |
| Height | 19 mm |