TCI LED-Driver DC 70W 24V VST - 122750
Product information "TCI LED-Driver DC 70W 24V VST - 122750"
The DC 70W 24V VST from TCI is an IP20-protected electronic emergency current capable ballast for LED modules, suitable for independent indoor installation. Its class I protection prevents electric shocks for direct or indirect contact. The rated power is 70 watts.
The constant voltage LED driver has input and output terminal block on opposite sides. The single terminal block on the primary circuit has a wire cross section of up to 0.5 - 2.5 mm2 / AWG20 - AWG13. The secondary circuit contains double terminal blocks with a wire cross section of up to 0.5 - 2.5 mm2 / AWG20 - AWG13. The clamping screws on primary and secondary circuits for cables have a diameter of min. 6 mm to max. 9 mm.
The TCI DC 70W 24V VST is protected against overheating and short circuits, mains voltage spikes and against overload.
Downloads & Documents
Login
Electrical data
| number of channels: | 1 |
|---|---|
| output voltage: | 24 |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 70 °C |
| protection type: | IP20 |
| mounting: | with strain relief |
| protection class: | I |
| environment temperature from: | -40 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703300729 |
|---|---|
| Length | 60 mm |
| Width | 225 mm |
| Height | 36 mm |
| Weight | 290 g |