TCI ECG-LED MP 32 K2 - 122200
Product information "TCI ECG-LED MP 32 K2 - 122200"
The constant current-constant voltage LED ECG MP 32 K2 from TCI isIP20-protected and suitable for indoor use. Its Class II protection preventselectric shocks for direct or indirect contact. Additionally, the driver hasDIP switches for selecting the output current.
The LED driver is supplied with a terminal cover and a cableretainer. The input and output terminal blocks are located on opposite sides(wire cross-section up to 1.5 mm2 / AWG15). There is a singleterminal block on primary and secundary circuit. Clamping screws for cableswith a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondarycircuits. The driver can be attached with screws.
The constant current-constant voltage LED Driver MP 32 K2 is protected againstoverheating and short circuits, against mains voltage spikes and againstoverload. The control accuracy of the output current including temperaturefluctuations is + - 5%.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
| lifetime: | 50000 h |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 75 °C |
| protection type: | IP20 |
| mounting: | surface mounting |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 50 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| setting type: | DIP-switch |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703307889 |
|---|---|
| Length | 67 mm |
| Width | 103 mm |
| Height | 21 mm |
| Weight | 120 g |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/