The intelligent and flexible electronic ballast for LED modules OTi DALI 35/220-240/1A0 LT2 from the Optotronic Intelligent series from Osram is suitable for SELV indoor installations - for example for downlights, spotlights or LED panels. Luminaires of protection class I and II can be installed. In addition, the constant current LED driver is suitable for use in luminaires with flexible current setting. Its rated power is 35 watts.

The LED driver can be dimmed via a DALI or PushDIM interface. Due to amplitude dimming you benefit from a high dimming quality in a range of 1-100%.

The DALI technology of the constant-current LED driver provides an easy use in corridors and toilets thanks to its three level Corridor function. The TouchDIM function ensures easy control by means of a pushbutton or a sensor. At sufficient residual light, it switches off automatically and thus saves energy.

The LED ECG is also suitable for use in emergency lighting systems according to IEC 61347-2-13 thanks to its (on and off) DC detection. The Fit for SMARTGRID technology function gives you a feedback on the power consumption and the operating hours. The automatic Constant Lumen Output setting allows the application in buildings according to EPBD / BREEAM / LEED.

The housing of the Osram OTi DALI driver is equipped with IP20 protection. A cable clamp kit is integrated for independent mounting. Thanks to thermal management and SmartControl, the system is reliably protected.