Lunatone Light Management Relais DALI RM8 1-10V - 86458668-AN
Product information "Lunatone Light Management Relais DALI RM8 1-10V - 86458668-AN"
The compact DALI DT5 relay module RM8 1-10V from Lunatone can be used to control and to switch electronic ballasts with a 1-10V control input. The DALI 8-bit direct power level is converted into a corresponding analogue signal. The module is suitable for flush mounting.
The relay 1-10 V module with analog output offers an automatic calibration algorithm for the output signal. It is also suitable for multiple ballasts (max. siking current 2mA).
The control of the relay contact is directly linked to the 8-bit direct arc power level: If the value is 0, the relay switches off, at any larger value it is switched on. The module is supplied directly via the DALI line, so that no additional supply is required.
The Lunatone interface has a DALI address and can be assigned to groups and scenes. The DALI input and the 1-10V output are galvanically isolated.
Electrical data
| operating frequency: | 0/50-60 Hz |
|---|---|
| through wiring: | no |
| rated voltage: | DALI bus V |
| conformity: | CE |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| protection type: | IP20 |
| mounting: | Installation |
| environment temperature to: | 45 °C |
Photometric data
| color: | white |
|---|---|
| interface: | DALI |
| solar panel: | no |
Logistic data
| item category: | light management |
|---|---|
| country of origin: | Bulgaria |
Dimensions & packaging
| EAN | 9010342010729 |
|---|---|
| Length | 59 mm |
| Width | 33 mm |
| Height | 15 mm |
| Weight | 21 g |
Lunatone Industrielle Elektronik GmbH
Paukerwerkstraße 5
1210 Wien
AT
office@lunatone.com
www.lunatone.com