TCI LED driver Micro MD 270 - 127108
Product information "TCI LED driver Micro MD 270 - 127108"
IP20 independent driver, for indoor use (MICRO MD).
- Class II protection against electric shock for direct or indirect contact (MICRO MD)
- Driver for built-in use (MICRO MD BI)
- It can be used for lighting equipment in protection class I and II (MICRO MD BI).
- Active Power Factor Corrector
- Current regulation ±8 % including temperature variations
- Supplied with terminal cover and cable retainer (MICRO MD)
- Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm² / AWG15)
- Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (MICRO MD)
- Driver can be secured with slot for screws.
Protections:
- against overheating and short circuits
- against mains voltage spikes
- against overloads
Downloads & Documents
Electrical data
| operating mode: | constant current |
|---|---|
| operating frequency: | 50-60 Hz |
| through wiring: | no |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 70 °C |
| protection type: | IP20 |
| mounting: | universal mounting |
| environment temperature from: | -20 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| lamp type: | LED |
| interface: | Phase gating |
| sensor type: | no |
| solar panel: | no |
Logistic data
| item category: | LED drivers |
|---|---|
| country of origin: | Italy |
Dimensions & packaging
| Length | 38 mm |
|---|---|
| Width | 102 mm |
| Height | 21 mm |
| Weight | 68 g |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/