TCI ECG-LED MP 50 K3 - 122204
Immediately available
€41.98
net €35.28
Product information "TCI ECG-LED MP 50 K3 - 122204"
The emergency light appropriate constant current LED driver MP 50 K3 from TCI is IP20-protected and suitable for indoor use. Its Class II protection prevents electric shocks for direct or indirect contact. The driver has DIP switches for selecting the output current and an Active Power Corrector. Additionally, a 12V max. 100mA auxiliary output for a fan is provided.
The input and output terminal blocks are located on the same side (wire cross-section up to 2,5 mm2 / AWG13). Clamping screws for cables with a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondary circuits. The driver can be attached with screws.
The constant current LED driver MP 50 K3 is protected against overheating and short circuits, against mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a. The control accuracy of the output current including temperature fluctuations is + - 5%.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
| lifetime: | 50000 h |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 85 °C |
| protection type: | IP20 |
| mounting: | with strain relief |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 50 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| setting type: | DIP-switch |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703307216 |
|---|---|
| Length | 79 mm |
| Width | 124 mm |
| Height | 22 mm |
| Weight | 150 g |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/