info@watt24.com +49 69 667737395 Free Light Calculation Service
Contact us
thousands of satisfied customers
Go to homepage
watt24

Tridonic LED-Driver LCBI 10W 500mA PHASE-CUT/1-10V LP - 87500284

Tridonic GmbH & Co KG

Tridonic LED-Driver LCBI 10W 500mA PHASE-CUT/1-10V LP - 87500284

Product number: 87500284
Content: 1 Stück

Immediately available

€15.93


Content: 1 Stück

net €13.39

Product information "Tridonic LED-Driver LCBI 10W 500mA PHASE-CUT/1-10V LP - 87500284"

The small dimmable SELV constant current LED driver LCBI 10W 500mA PHASE-CUT / 1-10V LP from the BASIC series by TRIDONIC is suitable for installation in luminaires of protection class I and II. The nominal power is 10 watts with an output current of 500 mA.

The LED ECG can be dimmed either by means of leading edge and trailing edge phase dimmers or by via 1-10V in a dimming range of typ. 10 - 100% (depending on the dimmer). The output is analog dimmed (current amplitude).

The white polycarbonate housing is IP20 protected and has push-in terminals.

The TRIDONIC LED driver is protected against overload, short-circuit and no-load. When the mains are switched on or off, there is no overshoot of the output current.

The LED ECG has a nominal life of up to 50,000 hours. TRIDONIC offers a warranty of 5 years.

Electrical data
output current: 500
operating mode: constant current
rated voltage: 220-240 V
lifetime: 50000 h
Casing
max housing temperature (tc-max): 65 °C
protection type: IP20
mounting: Installation
environment temperature from: -20 °C
environment temperature to: 50 °C
Photometric data
color: white
interface: 1-10 V
Logistic data
item category: LED drivers
Dimensions & packaging
EAN 9006210511375
Length 139 mm
Width 30 mm
Height 21 mm

TRIDONIC
Tridonic Deutschland GmbH
Edisonalle 1
89231 Neu-Ulm DE 

BestellungDE@tridonic.com 

www.tridonic.com/en/int