TCI DC MICROJOLLY 6W 500mA - 122428
Product information "TCI DC MICROJOLLY 6W 500mA - 122428"
6W constant current / constant voltage LED ECG
TCI's IP20-protected, dimmable constant current LED driver DC MICROJOLLY is suitable for luminaire installation or independent mounting. Its protection class II prevents electric shocks in direct or indirect contact. The LED driver has a nominal power of 6 watts with an output current of 500 mA.
The LED ECG is supplied with a terminal cover and a cable retainer. The input and output terminal blocks are on the same side. Terminal cross-section: 2.5 mm2 / AWG13 on primary; 1.5 mm2 / AWG1 on secondary circuit; 1.5 mm2 / AWG15 on regulation. On primary and secondary circuits there are clamping screws for cables with a diameter of min. 3 mm - max. 8 mm.
Dimmable via 1/0-10V interface
The LED ECG is dimmed via its 1/0-10V interface. With dimensions of 67 x 50 x 22 mm, it is small and compact.
The control accuracy of the output current including temperature fluctuations is + - 5%. The TCI constant current LED driver DC MICROJOLLY is protected against overheating and short circuits, mains voltage spikes and overload.
Downloads & Documents
Electrical data
| number of channels: | 2 |
|---|---|
| operating frequency: | 50-60 Hz |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 70 °C |
| protection type: | IP20 |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 50 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | 1-10 V |
| sensor type: | no |
Dimensions & packaging
| EAN | 8010703300453 |
|---|---|
| Length | 50 mm |
| Width | 67 mm |
| Height | 22 mm |
| Weight | 60 g |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/