TCI MAXI JOLLY HC MD 50 - 127552
Product information "TCI MAXI JOLLY HC MD 50 - 127552"
Features
- Double terminal blocks to loop other driver (max. 5 A).(3)
- Multipower driver supplied with dip-switch for the selection of the output current.
- IP20 independent driver, for indoor use.
- Class I protection against electric shock for direct or indirect contact.
- It can be used for lighting equipment in protection class I.
- Active Power Factor Corrector.
- Current regulation ±5 % including temperature variations.
- Input and output terminal blocks on the same side (wire cross-section up to 1,5 - 2,5 mm2
/ AWG15 - AWG13). - Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm.
- Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads. - Thermal protection = C.5.a.
Downloads & Documents
Electrical data
| operating mode: | constant current |
|---|---|
| operating frequency: | 50/60 Hz |
| operating voltage: | 220-240 V |
| through wiring: | no |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| system power: | 50 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 80 °C |
| protection type: | IP20 |
| material: | plastic |
| mounting: | universal mounting |
| protection class: | I |
| environment temperature from: | -20 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | grey |
| inclusive lamp: | no |
| interface: | 1-10 V |
| sensor type: | no |
| solar panel: | no |
Logistic data
| item category: | LED drivers |
|---|---|
| country of origin: | Italy |
Dimensions & packaging
| EAN | 8010703375413 |
|---|---|
| Length | 76 mm |
| Width | 110 mm |
| Height | 30 mm |