Shipping in 28 day(s)
€78.47
Prices incl. VAT plus shipping costs net €67.65
100W constant voltage LED ECG for built-in use
The dimmable 0 / 1-10V constant voltage LED driver DC 100W 24V SLIM R is suitable for installation in luminaires of protection class I. It has a nominal output of up to 100 watts. Its protection class I prevents electric shocks in direct and indirect contact.
The input and output terminal blocks are on opposite sides. There is also a single terminal on a primary and secondary circuit (wire cross-section up to 1.5mm2 / AWG15). The LED ECG is fastened with screws.
Dimmable via 0 / 1-10V
The LED ECG can be dimmed via its 0 / 1-10V interface in a range of 2-100%.
The TCI LED driver DC 100W 24V SLIM is protected against overheating, short circuits, mains voltage spikes and against overload. In addition, it has a protection fuse at the input and a thermal protection acc. EN 61347 C.5. a. automatically reversible.
Technical Data
Electrical Data
Rated Voltage: 220-240V
Rated frequency: 0/50/60Hz
Output voltage: 24.0000-24.0000V
Output current: 0.0410-4.1600A
Conformity: CE/ENEC/KEMAKEUR
Operating mode: Constant voltage
Technical lighting data
Dimming range: 2-100%
Wattage: LED#1#0#100#0.041#4.16#24#24#1
Dimmable: yes
Dimensions
Width [mm]: 30mm
Height [mm]: 22mm
Length [mm]: 360mm
Housing
IP protection class: IP20
Max. housing temperature (tc,max): 80°C
Ambient temperature (ta): -25...+50°C
Protection class: I
Item number: 127955
