TCI LED-Driver SMART 70 - 127402
Product information "TCI LED-Driver SMART 70 - 127402"
Emergency current capable 70W LED ECG
The emergency current capable constant current LED driver SMART 70 by TCI is suitable for installation in luminaires of protection class I as well as for independent mounting. Due to its IP20 protection, it is ideal for indoor use. Its equipment with Class II prevents electric shocks in direct or indirect contact. The rated power is up to 70 watts.
The input and output terminals are located on the same side (wire cross-section up to 1.5 mm2 / AWG15). Clamping screws for cables with diameter of min. 3 mm - max. 8 mm are mounted on on primary and secondary circuits. The LED driver can be secured with a slot for screws.
Output current adjustable via DIP switches
The TCI LED ECG has DIP switches for adjusting the output current and an Active Power Factor Corrector. The current regulation including temperature fluctuations is +- 5%.
The TCI SMART 70 is protected against overheating and short circuits, mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| lifetime: | 50000 h |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 80 °C |
| protection type: | IP20 |
| mounting: | surface mounting |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703322707 |
|---|---|
| Length | 76 mm |
| Width | 129 mm |
| Height | 30 mm |