thousands of satisfied customers
TCI SRL

TCI LED-Driver DC MAXI JOLLY HC/2 DALI

Product number: 123314
TCI SRL

TCI LED-Driver DC MAXI JOLLY HC/2 DALI

Product number: 123314

Immediately available

The DC MAXI JOLLY HC/2 DALI DALI from TCI is a constant current LED driver which can be used both for installation in luminaires of protection class II and for independent mounting. Its maximal system power is 60 W. DIP switches on the driver allow an adjustion of the output current.The LED-ECG is ... Read more

€53.05


Content: 1 Stück

Product information "TCI LED-Driver DC MAXI JOLLY HC/2 DALI"

The DC MAXI JOLLY HC/2 DALI DALI from TCI is a constant current LED driver which can be used both for installation in luminaires of protection class II and for independent mounting. Its maximal system power is 60 W. DIP switches on the driver allow an adjustion of the output current.

The LED-ECG is equipped with IP20 protection and suitable for indoor use. Its class II protection prevents electric shocks for direct or indirect contact.

The LED driver has a 12 V auxiliary output for a maximum of 100 mA and an analogical input for a thermal sensor. Additionally, an active power factor corrector is integrated.

The LED ECG is dimmable via 1...10V, PushDIM oder DALI interface.

The input and output terminal blocks are on the same side (wire cross-section up to 1.5-2.5 mm2 / AWG15-AWG13). Clamping screws for cables with a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondary circuits.

The TCI DC MAXI JOLLY HC/2 DALI is protected against overheating and short circuits, mains voltage spikes and overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5.a. The control accuracy of the output current including temperature fluctuations is + - 5%.

Electrical data
number of channels: 1
output voltage: 2-44 V
operating mode: constant current
rated voltage: 110-127 V
terminal type: Push-in CAGE CLAMP®
conformity: CE, ENEC
system power: 45 W
Casing
ballproof: no
fire protection: no
form type: rectangular
max housing temperature (tc-max): 85 °C
protection type: IP20
mounting: Installation
protection class: I
environment temperature from: -25 °C
environment temperature to: 50 °C
Photometric data
sensor: no
application: indoor
dimmable: yes
dimming range to: 100 %
dimming range from: 1 %
color: white
interface: 1-10 V
sensor type: no
Logistic data
item category: LED drivers
Dimensions & packaging
EAN 8010703321199
Length 76 mm
Width 129 mm
Height 30 mm