TCI LED-Driver DC 10W 24V MWU - 122122
Product information "TCI LED-Driver DC 10W 24V MWU - 122122"
The emergency current capable constant current constant voltage LED driver DC 10W 24V MWU by TCI is suitable for independent mounting or luminaire installation. The rated power is 10 watts. Thanks to its protection Class II, the LED driver is protected against electric shocks for direct or indirect contact.
The constant current LED driver is supplied with a terminal cover and a cable retainer. The input and output terminal blocks are on the same side (wire cross-section up to 2.5 mm2 / AWG13). There is a single terminal block on primary and secondary circuits. Clamping screws for cables with a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondary circuits. The driver can be attached with screws.
The TCI LED ECG is protected against overheating and short circuits, against mains voltage spikes and against overload.
Downloads & Documents
Electrical data
| through wiring: | no |
|---|
Casing
| ballproof: | no |
|---|
Photometric data
| sensor: | no |
|---|---|
| color: | white |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703300064 |
|---|---|
| Length | 117 mm |
| Width | 32 mm |
| Height | 20 mm |