TCI LED-Driver ATON 30/250-700 - 127362
Product information "TCI LED-Driver ATON 30/250-700 - 127362"
The ECG ATON 30/ 250-700 from TCI is suitable for the installation of LED luminaires of protection class I. Its Class I protection prevents electric shocks for direct or indirect contact. It has DIP-switches for adjusting the output current. Additionally, an active power factor corrector is integrated. The rated power is up to 30 W.
The input and output terminal blocks are located on the opposite side. (Wire cross section up to 1.5 mm2 / AWG15. Clamping screws for cables with a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondary circuits. The constant-current driver is fastened with screws.
The TCI LED ECG is protected against overheating and short circuits, mains voltage spikes and overload. The control accuracy of the output current including temperature fluctuations is +- 5%. The LED driver has a service life of 50,000 hours.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| system power: | 13 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | linear |
| max housing temperature (tc-max): | 85 °C |
| protection type: | IP20 |
| mounting: | surface mounting |
| protection class: | I |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703319257 |
|---|---|
| Length | 30 mm |
| Width | 187 mm |
| Height | 21 mm |
| Weight | 100 g |