Lunatone lighting management DALI LED Trailing Edge phase cut dimmer DALI PD
Lunatone lighting management DALI LED Trailing Edge phase cut dimmer DALI PD
Immediately available
€75.91
Prices incl. VAT plus shipping costs net €63.79
Product information "Lunatone lighting management DALI LED Trailing Edge phase cut dimmer DALI PD"
With the aid of the Lunatone DALI LED trailing edge phase cut dimmer PD, you can control 230V LED retrofit bulbs via DALI (Device Type 4 from firmware 3.0 or higher). The dimmer is suitable for resistive and inductive loads of 3-25W. It is built-in mounted in a back box.
The LED dimmer converts the DALI dimming level into a trailing edge phase cut controlled voltage. The minimum dimming level (MIN LEVEL) can be set via DALI. As of firmware 3.5, an additional operating mode is available as switch (DT7-compliant).
The Lunatone LED trailing edge phase cut dimmer represents a subscriber on the bus and is accordingly addressable. Double DALI terminals are built in for easy connecting through the DALI signal line.
Downloads & Documents
Electrical data
operating frequency: | 0/50-60 Hz |
---|---|
rated voltage: | DALI bus V |
conformity: | CE |
Casing
ballproof: | no |
---|---|
fire protection: | no |
protection type: | IP20 |
mounting: | Installation |
environment temperature to: | 50 °C |
Photometric data
application: | indoor |
---|---|
color: | white |
lamp type: | LED |
interface: | DALI |
solar panel: | no |
Logistic data
item category: | light management |
---|
Dimensions & packaging
Length | 59 mm |
---|---|
Width | 33 mm |
Height | 15 mm |
Weight | 19 g |