TCI LED-Treiber DC 20W 500mA WU S - 122248
Product information "TCI LED-Treiber DC 20W 500mA WU S - 122248"
20W constant current / voltage LED driver
The small, compact constant current LED driver DC 20W 500mA WU S from TCI is suitable for luminaire installation or independent installation indoors. It has a rated power of up to 20 watts. Its protection class II features prevents electric shocks in direct and indirect contact. Additionally, it has IP20 protection.
Terminal cover and cable retainer included
A terminal cover and a cable retainer are included. The input and output terminal blocks are mounted on the same side (wire cross-section up to 2.5 mm2 / AWG13). A single terminal block is attached to primary and secondary circuits. The clamping screws on primary and secondary circuits are suitable for cables with a minimum diameter of 3 mm to a maximum of 6 mm. The LED ECG is secured with a slot for screws.
The TCI DC 20W 500mA WU S is protected against overheating, short circuits, mains voltage spikes and overload. The current regulation is +- 5% including temperature fluctuations. For use in household electrical appliances, the LED driver has double output impedance.
Electrical data
| number of channels: | 1 |
|---|---|
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
| system power: | 20 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 80 °C |
| protection type: | IP20 |
| mounting: | with strain relief |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703300217 |
|---|---|
| Length | 38 mm |
| Width | 122 mm |
| Height | 28 mm |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/