TCI LED-Driver SMART 50 BI - 122219
Product information "TCI LED-Driver SMART 50 BI - 122219"
The constant current driver for LED modules SMART 50 BI from TCI is suitable for installation in luminaires of protection class I. The output current can be adjusted via DIP switches. The maximum system power is 50 watts.
The LED driver has an analogical input for thermalsensor connection. An Active Power Factor Corrector is integrated as well.
The input and output terminal blocks are mounted on the same side (wire cross-section up to 1.5 mm2 / AWG15). The LED ECG can be secured with a slot for screws.
The TCI SMART 50 BI is protected against overheating and short circuits, mains voltage spikes and overload. It also has a thermal protection according to EN 61347 C.5.a. The current control is + - 5% including temperature fluctuations. The lifetime is 50,000 hours.
The LED driver’s housing is IP20 protected.
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| lifetime: | 50000 h |
| system power: | 27 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 90 °C |
| protection type: | IP20 |
| mounting: | Installation |
| environment temperature from: | -25 °C |
| environment temperature to: | 50 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | black |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703310322 |
|---|---|
| Length | 76 mm |
| Width | 110 mm |
| Height | 30 mm |
| Weight | 160 g |
TCI
TCI TELECOMUNICAZIONI ITALIA S.R.L.
Via Parma 14
21047 Saronno
IT
tci@tci.it
www.tci.it/en/