Product information "TCI LED driver dimmable DC MAXI JOLLY SV DALI – 151504"
- Multipower driver supplied with dip-switch for the selection of the output current
 - IP20 independent driver, for indoor use (DC MAXI JOLLY SV DALI)
 - Class II protection against electric shock for direct or indirect contact (DC MAXI JOLLY SV DALI)
 - Driver for built-in use (DC MAXI JOLLY SV BI DALI)
 - It can be used for lighting equipment in protection class I and II (DC MAXI JOLLY SV BI DALI)
 - Active Power Factor Corrector
 - Analogical input (NTC) for thermal sensor connection
 - Auxiliary output 12 V max. 100 mA
 - Current regulation ±5 % including temperature variations
 - Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm²
/ AWG13) - Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (DC MAXI JOLLY SV DALI)
 - Protections
- against overheating and short circuits
- against mains voltage spikes
- against overloads - Thermal protection = C.5.a
 
Downloads & Documents
Electrical data
| operating frequency: | 50-60 Hz | 
|---|---|
| rated voltage: | 220-240 V | 
| terminal type: | plug-in terminal | 
| conformity: | CB, CE, EAC, ENEC, UKCA | 
Casing
| fire protection: | no | 
|---|---|
| form type: | linear | 
| max housing temperature (tc-max): | 90 °C | 
| protection type: | IP20 | 
| material: | plastic | 
| mounting: | universal mounting | 
| protection class: | I/II | 
| environment temperature from: | -25 °C | 
| environment temperature to: | 50 °C | 
Photometric data
| dimming range to: | 100 % | 
|---|---|
| dimming range from: | 1 % | 
| color: | grey | 
| lamp type: | LED | 
| sensor type: | no | 
Dimensions & packaging
| Length | 124 mm | 
|---|---|
| Width | 79 mm | 
| Height | 22 mm |