Skip to main content
thousands of satisfied customers

Niko UP motion detector Swissgarde 300 UP D - 25290D

Product information "Niko UP motion detector Swissgarde 300 UP D - 25290D"

The Niko UP motion detector Swissgarde 300 UP D motion detector is ideal for rooms where a frontal approach to the sensor is not possible.
You can use the Swissgarde 300 UP D motion detector via doors and elevator inputs or in switch programs.
You can also use the 300 UP D motion detector as a flush-mounted wall detector for stairways, corridors, cellars and garages.
Thanks to the horizontal and vertical detection area (also via doors and access points) and 3 PIR sensors, you have a very accurate detection angle range of 180 °.
A daylight-dependent lighting control can be switched on and off (see installation instructions).
The Swissgarde 300 UP D motion detector can be installed between 2.00 and 4.00 m in height.
For the interior, the Swissgarde 300 UP D movement detector is equipped with the IP20 protection .
Niko also offers 5 years manufacturing guarantee for all products.
You can program the SwissGuard 300 UP D motion detector by RC radio remote control (RC = Radio Controlled) or IR hand transmitters.
These articles can be found in the lower cross-selling area and can also be ordered at the same time.
Electrical data
rated voltage: 230 V
switching power inductive: 1150 W
switching power ohmic: 2300 W
Casing
protection type: IP20
mounting: flush mounting
protection class: II
environment temperature from: -20 °C
environment temperature to: 40 °C
Photometric data
sensor: yes
detection angle: 180 °
color: white
sensor type: passive infrared
Logistic data
item category: sensors
Dimensions & packaging
EAN 3505100252900
Length 80 mm
Width 80 mm
Height 32 mm
Weight 140 g

Wygwam Deutschland GmbH
Mainzer Landstrasse 227
60326 Frankfurt Deutschland
Tel. +49 7623 96697 0
verkauf-de@niko.eu
https://www.niko.eu/de-de/