In unserem neuesten Video zeigen wir Ihnen die Inbetriebnahme des...
10097533
10097533
alte HÜCO-Artikelnummer: 097533
Art.-Nr. 10097533Electronic control gear ECG for fluorescent lamps
- All models in compact housing for space-saving application in luminaires
- Multi-Power technology for operation of different lamps and wattages on the same ECG
- Electrode preserving warm start for maximum lamp life, even at increased switching frequency; starting time < 1.5 s
- Cut-Off technology: minimised heat current through electrodes during operation, for optimum light output and reduced power loss.
- Safety switch-off in case of abnormal lamp operation, e. g. defective electrode and end of lamp life; tested acc. to EN 61347-2-3 + Test 2
- Suitable for direct current operation and emergency lighting installations; complies with requirements for emergency lighting according to EN 61347- 2-3/J
- Constant lamp output independent of mains voltage fluctuations
- Optimum ignition safety even at low temperatures: automatic second start if necessary
- Automatic restart after lamp replacement
- Suitable for direct current operation and emergency lighting installations; complies with requirements for emergency lighting according to EN 61347- 2-3/J
- Quick restart of lamps after short power disruptions
- Connecting earth can be disregarded in suitable luminaires with safety classification 2
- Energy efficiency EEI=A2
- Nominal service life: 50.000 h with failure rate of ≤ 10% and operation at tc=tc,max
Elektrische Daten
-
Lebensdauer:
50000 h
Lichttechnische Daten
-
Mit Leuchtmittel:
Nein
Dimmbar: Nein
Abmessungen
-
Länge [mm]:
103 mm
Breite [mm]: 67 mm
Höhe [mm]: 30 mm
Gehäuse
-
IP-Schutzart:
IP20
Logistische Daten
-
Hersteller:
BAG electronics GmbH
Bestellen Sie passende Produkte gleich mit:
Energie sparen mit Komfort durch einen Bewegungssensor
Sie wollen umverdrahten und benötigen eine Klemme
